Look to the section entitled "TCP/IP configuration methods" to configure the device with a static IP address. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network. There. This guide provides a step-by-step process for configuring the APC AP7900B, interwoven with personal anecdotes and insights into why this $100–$150 investment for a used unit is a must-have for home lab power management. If you don't have one, many vendors sell USB to. Introduction Product Description The APC® Switched Rack Power Distribution Unit (PDU) is a stand-alone, network-manageable device that provides current monitoring and allows programmable control of eight, sixteen, or twenty-four power outlets (depending on the model).
[pdf] Just connect the included P1 cable to your smart meter and attach your devices to the splitter's outputs. Within a minute, everything is ready, allowing multiple devices to read real-time data simultaneously. Unlike cheap passive Y-cables, this active splitter buffers, amplifies and galvanically isolates each output (optocouplers per port), so up to four devices can communicate with your DSMR. The splitter can be used with electric, gas, water or in fact any meter with a pulse output (Volt-free contact, Reed relay or Open-collector). instruction manual MUST be adhered to. suitable for use in wet environments such as water meter pits. While most splitters offer only 2 or 3 ports, this model provides extra capacity at an affordable price. Four ports are unique in its class –.
[pdf] 
